Hilti Tester4 Safety Bolt Inspection System

Introduction to the Hilti Safety Bolt Inspection System

Introduction to the Hilti Safety Bolt Inspection System

The Hilti Tester4 Inspection system to test safety bolts on the exterior of buildings.

The instrument will check the bolts to AS1891.4-2000 Industrial fall arrest systems and devices Part4: Selection, Use & Maintenance or to AS4488.2-1997 Industrial rope access systems Part 2: Selection, Use & Maintenance.

These tests need to be performed on a yearly basis on exterior connection points on a building. These connection points will typically be used to suspend window cleaning harness systems. It is part of the building owners/managers 'duty of care' to make sure these fall arrest bolts comply with Australian standards.

If these safety bolts are checked every 12 months with this tester then the bolts are safe to use.

Additional Resources

Test Report Example (pdf)