B&K 2238E Type-1 Integrating SLM Enhanced SW and Logging

To download data from this system you need to use the BKLINK software... Note: this software only supports COM ports 1~4... If you are using an RS232 to USB converter you will need to note which communications port number has been allocated to the interface.

• Connect the 2238 to your PC
• Run BKLINK software
• This is available on the supplied CD
• Click the download button and select a file name
• Press the SYSTEMS key (Upper right just below the power button) Use the arrow keys and highlight ‘Printer Interface’
• Select the printer Interface (Use the 'soft' function key lowest row left side)
• Make sure the Baud Rate is set to 9600
• Press the OK function key (Use the 'soft' function key lowest row left side)
• Then the Close function key (Use the 'soft' function key lowest row right side)

To print ‘Saved’ data:
• Press the SETTINGS key (Third row from the top left hand side)
• Use the arrows to highlight the File Manager • Select the File Manager (Use the 'soft' function key lowest row left side) • Use the Right arrow to select each file to be printed • Select Menu (Use the 'soft' function key lowest row left side) • Select Print • You will see data arriving in the PC and the 2238 will indicate each file as it is printed