How to set up Testo 184 G1 Data Logger
How-to setup the Testo 184 G1 data logger's measurement parameters using the device software. Also includes how to turn the data logger on and off for recording, and preparing the data for reporting.
Featured Posts
Introduction to GEOX 3 Pole Method of Earth Ground Testing
Equipment available can perform all four types of earth ground measurement; 3 & 4-pole (Fall of Potential) and 4-pole soil resistivity testing (using stakes), Selective testing (using 1 clamp and stake) and Stakeless testing (using 2 clamps only).
Overview of the Megger MOM2 Micro-ohmmeter
The MOM2 is a lightweight (1 kg), handheld Micro-ohmmeter. It measures up to 220 A test current, auto-ranging from 999 μohm to 1000 mohm FS. Rechargable batteries provide 2200 measurements for I min = 50 A, or 800 for I min = 100 A. Memory for 190 recorded measurements, downloadable via Bluetooth with provided software. Kelvin probes included.
Overview of the Megger Cable Identification Kit
An overview on the equipment provided with the Megger Cable Identification Kit. The unit provides reliable cable identification for both energised and non-energised cables. It can generate pulses on cables 440 V 3 phase cables.
An overview of the Megger Sverker 900E Relay Test Set
Covering the testing options of the Megger Sverker 900E Relay Test Set as well as the inputs and outputs on the interface. Relay test set for 3 phase protective relay equipment. Current ranges to 105 A. ac outputs to 900 V & dc outputs to 900 V. Power Factor and Phase shifting measurements. 4x Voltage and 4x Current generators with 4 binary inputs, 2 binary outputs, and timing measurement. Built-in computer controller for setting up and sequencing tests.
Getting Started on the Hioki PW3198 Power Quality Analyser
An overview on how-to use the Hioki PW3198 Power Quality Analyser and accessories. The Hioki PW3198 is a premium Power Quality Analyser for demanding applications. The unit includes 3x 1000 A ac CTs, 1x 200 A ac/dc CT and 4x 9667 5000 A flexible CTs. Ideal for ac mains studies as well as solar inverter evaluations. The unit is supplied with Hioki 9624 PQA-HiVIEW Software for detailed data analysis and report generation.
An Introduction to the Flir E60 Thermal Imaging Camera
A quick overview of the Flir E60 Thermal Imaging Camera including the supplied equipment, basic functionality and settings. The Flir E60 measures -20 to 650°C, IR and MSX resolution 320 x 240, 60 Hz. NETD 50 mK. 2x and 4x digital zoom. Visual image 3.1 MP, built-in LED lamps, laser locator, scalable IR picture-in-picture. Video recording, touch screen, composite video out, Wi-Fi, and USB. Infrared camera applications include electrical distribution, mechanical (belts, rollers, couplings, gaskets/seals, compressors etc), product development, HVAC/R, automotive. Bluetooth support for voice annotations and selected Extech equipment. PC software provided. Mobile app available.
An Overview of the Megger EZ-Thump
Covers the capacity of the Megger EZ-Thump, how to determine voltage capacity, and various functionality features.
The Megger EZ-Thump 12kV Thumper and TDR Power Cable Fault locator operates off either ac supply or internal batteries. The kit includes the Megger pin-pointer to locate faults when used in thump mode. Internal battery provides 30 min of thumping with a 3 h recharge time. Generates a 500 J 0 to 12 kV @ 12 mA pulse for thumping.
Measure Internal Impedance on Batteries using a Hioki 3554
How to determine failure levels for your batteries, the internal resistance measurement level, and cut-off voltage. Also gives a quick overview on setting up the Hioki 3554 Battery HiTester to conduct tests.
Takes on-the-spot measurements of the internal resistance, voltage and temperature of lead-acid batteries, principally for UPS and similar applications, without needing to shut off the battery. Instantaneous results, on a three-rank scale of Pass, Warning, or Fail, using a composite decision based on the internal resistance and the voltage. Resolution of 1 µohm, necessary for high capacity batteries (of at least 500 Ah). Includes Hioki 9460 clip type temperature leads.
Olympus OmniScan MX2
Ultrasonic testing with the Olympus OmniScan MX2.
This video was filmed at the 2019 WCCM/SINCE conference in Singapore.
Diagnosing Motor Burnout with a Power Quality Analyser
This case study focuses on how a major industrial client addressed frequent electric motor winding burnout by monitoring voltage irregularities with the Hioki PQ3198-94 Power Quality Analyser. By identifying and resolving voltage supply issues, the client successfully reduced motor downtime and maintenance costs.
Driving Efficiency in Large-Scale Project
This case study highlights how TechRentals goes beyond equipment rentals to deliver strategic solutions for complex energy projects. It details our critical role in a major energy project in New South Wales, Australia, which involved building substations and transmission lines. TechRentals provided not only equipment but also essential expertise and support, ensuring the project’s success.